With drop force of bottom impact and side vibration, the manufacturer tightly fill the senior moisture-absorption chemical raw materials-molecular (Alumina) inside both drying towers. When the Moisture-Contained gas impacts the sorbent in a curve following specific flow direction, the vapor water in the air will be absorbed under the pressure state. The water will be released automatically from the sorbent with the instant pressure drop method when the sorbent absorbs the water and saturated. Just by this characteristic, this product works alternatively in the sequence of absorbing, releasing, regenerating and charging in the manner of shifting between two towers.
1. The excellent design of the two tower or use our patent there towers desigh high efficiency.
It can ensure activated aluminium oxide contact time enough to dry the saturated wet air entering in dryer to the needed dew point, extra desiccative can compensate the desiccative consumption and ensure the life time, then guarantee the best performance.
2. Adopts the large scale diffuser.
To ensure the air stream well proportioned to get through the desiccative level.
3. Reliable controlling system.
4. Within 10 minutes period dry the compressed air to very low dew point of -50°C or within 4 minutes .period dry to -70°C,and can be conditioned at site.
5. System Pressure drop is lower than 0.03MPa.
6. Easily operation & easily maintenance.